Future Artefacts

Students of Antiquity tell us that an artefact is an object made or given shape by man, not only prized in its day but something that retains its beauty in a timeless fashion.

The Lotus

Lotus flowers are said to represent female sexual power and fertility as well as birth and rebirth. The ancient Egyptians portrayed the goddess Isis being born from a lotus flower.



Halo

Your Halo can be created in platinum, white, yellow or rose gold and your preferred choice of stones, be they diamond, ruby, sapphire or emerald.

Orbital

As the stars circle in their constellations, so do the pearls and gemstones in our Orbital collection.



Naja

Naja Au denotes power, mystery and beauty. The word Naja is taken from the Sanskrit word naga (with a hard "g") meaning "snake". 

Origami

The Japanese art of paper folding is re-imagined in Silver, Gold and Platinum. Our first piece is our take on the origami unicorn featured in the move Blade Runner.


Telephone +44 (0)7940 206709

Bespoke Engagement Ring Guide

An Introduction


First, a geology lesson: diamonds are 99.95% pure crystallised carbon and can be extremely old - one to three billion years old, in fact. They are the hardest naturally occurring substance known and are formed some 100 miles beneath the Earth's surface when crystals of diamond occur in volcano feed-pipes. When volcanoes erode down, they release diamonds from their feed-pipes into layers of gravel which are later mined. However, due to the relative rarity of this natural process, diamond mines are found in just a handful of sites around the world.

In rough form, diamonds are shipped to the world's cutting centres to be shaped and polished before being set as jewellery. It is the hardness, brilliance and sparkle that emerges during this process that transforms them into a girl's best friend.

The 4 Cs – Cut, Colour, Clarity and Carat provide a way of grading & certifying diamonds. It is these characteristics that determine the value, rarity and beauty of every diamond. Understanding the 4 Cs is a key part of choosing the right diamond for your taste and budget.

Once you've familiarised yourself with each of the 4 Cs, you will be able to decide which ones are the most important to you when making your choice.

Until the middle of the twentieth century, there was no agreed-upon standard by which diamonds could be judged. The Gemological Institute of America created the first, and now globally accepted standard for describing diamonds: Colour, Clarity, Cut, and Carat Weight. Today, the 4Cs of Diamond Quality is the universal method for assessing the quality of any diamond, anywhere in the world.

The creation of the Diamond 4Cs meant two very important things: diamond quality could be communicated in a universal language, and diamond customers could now know exactly what they were about to purchase.

We would however suggest you consider a 5th C - Certification, further ensuring that your diamond is exactly the stone you want and offering additional confidence in the purchase.

Diamond Shapes


Round brilliant

Round Brilliant


The most brilliant of all shapes, the Round Brilliant is the most popular diamond shape, representing over 70% of all diamonds sold.

Princess

Princess


The next most popular shape is the square-shaped Princess. Exquisite in both name and brilliance, a princess-cut diamond’s “V” pavilion facets are a sight to behold under a microscope.

Emerald

Emerald


The emerald cut was originally designed for the cutting of emeralds but was found to work perfectly for diamonds, enhancing their lustre.

Oval

Oval


Created by Lazare Kaplan in the 1960's, oval diamonds are a modified brilliant-cut. The oval is an ideal choice for a customer who likes the look of a round diamond, but wants something more unique.

Asscher

Asscher


First made popular during the Art Deco era, a perfectly symmetrical diamond with spectacular beauty, scintillation and brilliance.

Pear

Pear


The pear diamond has a brilliant cut which optimises light reflection, and combines the shape of an oval and marquise diamond.

Asscher

Marquise


The marquise shape stone is an elongated shape with pointed ends. This shape looks spectacular on longer fingers.

Heart

Heart


The heart shaped diamond is pear shaped with a cleft cut into its top. A complex cut with 56 to 58 facets & demands a great amount of skill to ensure maximum brilliance.

Radiant

Radiant


The Radiant shape diamond combines the elegance of the Emerald-cut with the brilliance of the Round Brilliant.

Cushion

Cushion


Popular during the Victorian era, this rare cut, also known as the pillow cut diamond, has a square or rectangular shape with rounded corners.

The Cut


Cut refers not to a diamond's shape (e.g. round, oval, pear, etc.) but to a diamond's proportions, symmetry and polish. The beauty of a diamond depends more on cut than any other factor. Though extremely difficult to analyse and quantify, diamond cut has 3 primary effects on appearance: Brilliance (the brightness created by the combination of all the white light reflections from the surface and the inside of a polished diamond), Fire (the dispersion of light into the Colours of the visible spectrum, seen as flashes of colour), and Scintillation (the flashes of light and dark, or sparkle, when a diamond or light source is moved).

When a diamond is fashioned from a rough stone, the cutter must balance optimal cut (and therefore appearance) against maximum yield (cutting the diamond to maintain as much carat weight from the rough stone as possible). Because many customers are willing to pay more for a larger, fair-cut cut diamond than for a slightly smaller, well-cut diamond, there is pressure on the cutter to sacrifice appearance for weight. This is why the Cut grade is so important; it allows the purchaser to identify those stones that were cut Fair to Poor in an effort to gain carat weight.

Proportions

Diamond proportion refers to the relationship between the size, shape, and angle of each facet of a diamond. A wide range of combinations are possible, ultimately determining the diamond's interaction with light.

When light strikes a diamond, approximately 20% immediately reflects off the surface (as glare). Of the 80% that enters, a portion will escape through the bottom of the diamond (where the observer cannot appreciate it). A well proportioned diamond will have each facet properly placed and angled so as to maximize the amount of light that reflects back out of the crown (top) of the diamond, to the eye of the observer. This reflected light is perceived as scintillation, fire and brilliance.

Most gemologists agree that the best cut diamonds are those that follow a set of formulae calculated to maximise brilliance. These formulae can be seen in a diamond's proportions, most importantly how the depth compares to the diameter, and how the diameter of the table compares to the diameter of the diamond.

However, the variance in the proportions between an Ideal Cut and a Poor Cut can be difficult to discern by the casual observer. Because cut is so important, several grading methods have been developed to help consumers determine the cut of a particular diamond. In general, these grades are:

Diamonds to your desk

Ideal Cut

This cut is intended to maximise brilliance, and the typically smaller table sizes of these diamonds have the added benefit of creating a great deal of dispersion or 'fire' as well. Ideal quality diamonds are truly for the person who enjoys knowing that he has one of the finest things that money can buy. This category applies only to round diamonds.

Very Good

These diamonds reflect most of the light that enters them, creating a good amount of brilliance. With these diamonds, the cutters have chosen to stray slightly from the preferred diamond proportions in order to create a larger diamond.

The result is that these diamonds fall slightly outside of some customers' preferences in terms of, for example, table size or girdle width, though in many cases, many of the parameters of diamonds in this range will overlap with certain parameters of diamonds in the Ideal or Premium ranges. Generally, the price of these diamonds in slightly below that of Premium cuts.

Premium

In the case of round diamonds, many Premium Cut diamonds have cuts that are the equal of any Ideal Cut diamond, though they often can be purchased at slightly lower prices than Ideal Cuts. They are intended to provide maximum brilliance and fire. Like the Ideal Cut, these are also for the person who enjoys knowing that he has one of the finest things that money can buy.

Good

Diamonds that reflect much of the light that enters them. Their proportions fall outside of the preferred range because the cutter has chosen to create the largest possible diamond from the original rough crystal, rather than cutting extra weight off to create a smaller Premium quality diamond. Diamonds in this range offer excellent cost-savings to customers who want to stay in a budget without sacrificing quality or beauty.

Fair & Poor

A diamond graded as fair or poor reflects only a small proportion of the light that enters it. Typically these diamonds have been cut to maximise the carat weight over most other considerations.

Anatomy


My Image

Diameter
The width of the diamond as measured through the girdle.
Table
This is the large, flat top facet of a diamond.
Crown
The upper portion of a cut gemstone, above the girdle.
Girdle
The narrow rim of a diamond that separates the crown from the pavilion. It is the largest diameter of any part of the stone.
Pavilion
The lower portion of the diamond, below the girdle. It is sometimes referred to as the base.
Culet
The tiny facet on the pointed bottom of the pavilion, which is the portion of a cut gem below the girdle.
Depth
The height of a gemstone, from the culet to the table.

Clarity


Because they are formed deep within the earth, under extreme heat and pressure, virtually all diamonds contain 'birthmarks'; small imperfections inside the diamond (called inclusions) or on its surface (called blemishes).

Clarity refers to the degree to which these imperfections are present.

Diamonds which contain numerous or significant inclusions or blemishes have less brilliance because the flaws interfere with the path of light through the diamond.

The position of an inclusion affects how easily it can be seen. Diamond cutters make every effort to cut a stone so that inclusions are not visible through the table of the finished diamond.

The preferred position for inclusions is under the bezel facets or near the girdle because they are harder to see there.

Almost all diamonds are graded for clarity using the 11 point diamond clarity scale created by the GIA, including diamonds which were not actually graded by GIA (every diamond we use is GIA certified). In grading diamond clarity, the GIA considers the number, size, colour, reflectivity, and position of every flaw visible under 10x magnification.

FL

Flawless: No inclusions or blemishes are visible to a skilled grader using 10x magnification.

Extremely rare; less than 1 in 5,000 jewellery quality diamonds are rated FL.

IF

Internally Flawless: No inclusions, only blemishes are visible to a skilled grader using 10x magnification.

FL and IF diamonds appear identical unless viewed under 10x magnification by a skilled grader. Less than 3% of jewellery quality diamonds are rated IF.

VVS1
VVS2

Very, Very Slightly Included: Inclusions are difficult for a skilled grader to see under 10x magnification.

VVS1 inclusions are typically only visible from the pavilion, while VVS2 inclusions are visible from the crown. In each, the inclusions are invisible to the eye, appearing identical to the higher grades unless viewed under 10x magnification by a skilled grader.

VS1
VS2

Very Slightly Included: Inclusions are clearly visible under 10x magnification but can be characterised as minor.

Inclusions are not visible to the naked eye. Perhaps 1 in 100 untrained observers can detect VS2 inclusions with the naked eye, on close inspection under ideal conditions.

SI1
SI2

Slightly Included: Inclusions are noticeable to a skilled grader using 10x magnification.

SI1 is the lowest grade with flaws often invisible to the naked eye. SI2 inclusions are usually visible to the naked eye, although they will require close inspection.

I1
I2
I3

Included: Inclusions are obvious under 10x magnification and may affect transparency and brilliance.

I1 diamonds have inclusions that are almost always visible to the naked eye. I2-I3 diamonds have pronounced inclusions, and in the case of I3 may even affect the diamond's durability.

Carat


Diamond carat weight is the measurement of how much a diamond weighs.

A metric "carat" is defined as 200 milligrams.

Each carat can be subdivided into 100 'points.' This allows very precise measurements to the hundredth decimal place. A jeweller may describe the weight of a diamond below one carat by its 'points' alone. For instance, the jeweller may refer to a diamond that weighs 0.25 carats as a 'twenty-five pointer.' Diamond weights greater than one carat are expressed in carats and decimals. A 1.08 carat stone would be described as 'one point oh eight carats.'

All things being equal, diamond price increases with diamond carat weight, because larger diamonds are rarer and more desirable. But two diamonds of equal carat weight can have very different values (and prices) depending on the other diamond 4Cs: Clarity, Colour, and Cut.

How did the carat system start?

The modern carat system started with the carob seed. Early gem traders used the small, uniform seeds as counterweights in their balance scales. The carat is the same gram weight in every corner of the world.

The word "carat" was possibly derived from the Greek word kerátion literally meaning a small horn, and refers to the carob seed as a unit of weight.

What are "magic sizes"?

Some weights are considered "magic sizes" – half carat, three-quarter carat, and carat.

Visually, there is little difference between a 0.99 carat diamond and one that weighs a full carat.But the price differences between the two can be significant.

Carat weight

Colour


Diamonds come in a variety of colours, some of them highly prized (pinks, blues, even yellow). In a white diamond, however, the presence of a yellow tint will lower the price of a diamond. The less body colour in a white diamond, the more true colour it will reflect, and thus the greater its value.

Diamonds are assigned a colour grade by the GIA in a viewing environment specially designed to eliminate colour from surrounding surfaces as well as the light source itself.

This allows the colour of the diamond to be accurately measured. Minor differences in diamond colour detected in this environment are very difficult, if not impossible, to detect in a normal environment.

The diamond industry has adopted the GIA diamond colour scale; almost every diamond sold today is rated using the GIA colour scale, whether it was actually certified by the GIA or not.

Colourless D E F

While there are differences in colour between D, E, and F diamonds, they can be detected only by a gemologist in side by side comparisons, and very rarely by the untrained eye.

D-F diamonds should only be set in white gold / platinum. Yellow gold reflects colour, negating the diamond's colourless effect.

Colourless D E F

D to F

Near Colourless G H

While containing traces of colour, G-J diamonds are suitable for a platinum or white gold setting, which would normally betray any hint of colour in a diamond.

Because I-J diamonds are more common than the higher grades, they tend to be a great value. An I-J diamond may retail for half the price of a D diamond. Within the G-J range, price tends to increase 10-20% between each diamond grade.

Near Colourless G H

G to H

Faint Colour

Beginning with K diamonds, colour (usually a yellow tint) is more easily detected by the naked eye. Set in yellow gold, these warm coloured diamonds appeal to many, and are exceptionally valuable.

Due to its perceptible colour tint, a K diamond is often half the price of a G diamond.

Faint Colour

I to J

Faint Colour

K to M

Very Light Colour

Diamonds in the N-R colour range have an easily seen yellow or brown tint, but are much less expensive than higher grades.

For almost all customers, S-Z diamonds have too much colour for a white diamond.

Very Light Colour

N to R

Very Light Colour

S to Z

What is ultraviolet fluorescence?

Fluorescence is the visible light some gemstones emit when they are exposed to invisible ultraviolet (UV) rays. In natural diamonds, blue is the most common colour of fluorescence, but other colours may be visible.
 
On a GIA Diamond Grading Report, fluorescence refers to the strength, or intensity, of the diamond’s reaction to long-wave UV, which is an essential component of daylight.

More

Colour becomes much harder to detect once a stone is set in a ring and placed in an environment that contains colour (as opposed to the all white background used in diamond colour grading). For instance, an H colour diamond may look as colourless as a D when set in a ring under normal lighting conditions, especially if the two are not compared side by side.

Another factor that affects a diamonds's apparent colour is the colour of the mounting itself. Yellow gold makes slight amounts of yellow in a diamond less obvious, while white metal mountings make the colour in yellow diamonds more apparent.

The vast majority of untrained observers (and many gemologists) cannot distinguish a colour grade from the one just above or below unless the diamonds are compared side by side in a controlled environment.

Colour becomes more important as carat weigh increases. Colour is easier to perceive in a larger diamond, just as a carafe of white wine shows more colour than a single glass.

GIA Certification


The Gemological Institute of America, or GIA, is a nonprofit institute dedicated to research and education in the field of gemmology and the jewellery arts.

Founded in 1931, GIA's mission is to protect all buyers and sellers of gemstones by setting and maintaining the standards used to evaluate gemstone quality. The Institute does so through research, gem identification, diamond grading services and a variety of educational programs.

Through its world-renowned library and subject experts, GIA acts as a resource of gem and jewellery information for the trade, the public and worldwide media outlets.

In 1953, the GIA developed its International Diamond Grading System and the Four Cs (cut, clarity, colour, and carat weight) as a standard to compare and evaluate the quality of diamonds.

Today, the institute is headquartered in Carlsbad, California and operates out of 13 countries, with 11 campuses, 9 laboratories and 4 research centres worldwide.

The GIA set the standard for diamond grading and gemmological identification, and their grading system serves as the international gem and jewellery industry's benchmark credentials.

Shape and Cutting Style: The diamond shape and cutting style.

Measurement: Lists the diamond's dimensions in millimetres.

Carat Weight: The weight of diamond listed to the nearest hundredth of a carat.

Colour Grade: A grading which assesses the absence of colour in a diamond.

Clarity Grade: Clarity grade determined under 10x magnification.

Cut Grade: A grade of cut as determined by a diamond's face-up appearance, design and craftsmanship. A cut grade is available on round diamonds graded after Jan. 1, 2006.

Finish: Grades that represent a diamond's surface and facet placement.

Polish: Rating the overall smoothness of the diamond's surface.

Symmetry: Measuring the shape, alignment and placement of the diamond's facets in relation to one another as well as the evenness of the outline.

Fluorescence: Colour, and strength of colour when diamond is viewed under UV light.

Comments: A description of additional diamond characteristics not already mentioned in the report.

Clarity Plot: A map of the approximate size, type, and position of inclusions as viewed under a microscope.

Proportion Diagram: A map of the diamond's actual proportions.


How do you tell a fake diamond?


Fake diamonds - or what we call diamond simulants- have many different types, they all have the appearance of a diamond, but differ in the physical properties and characteristics from each others, and from diamonds, which is the key to tell which is what. Here's a list of the most popular ones, and how to spot each one of them:

Cubic zirconia (CZ)

This is the most popular one nowadays, it is as brilliant and lusterous as diamond, but with a slightly higher dispersion, and hardness of 8.15 on Mohs scale of mineral hardness. But its Specific gravity (SG) is 5.80, making it heavier than a diamond (SG 3.52) of the same dimensions, so you can differentiate it by weighting it and looking for the weight to dimension table, if it doesn't make sense, it's probably CZ. Usually it has orange pavilion flash. Experienced traders might even recognize it only by holding it.

Synthetic Moissanite

This is the hardest one to differentiate, and the most convincing one, with a brilliant and fire close to diamond, and a hardness of 9.15 it is the hardest diamond simulant so far. However, it processes light differently, causing doubling images to appear inside when looked at under 10X, that's the best way to spot it.

Synthetic Rutile

Low hardness, extreme fire, and has a doubling effect.

Yttrium aluminium garnet (YAG)

Lower hardness & lower fire than diamond, and it also has blue & violet pavilion flash.

Gadolinium gallium garnet (GGG)

Low hardness, and high SG, so much heavier than diamond.

Zircon

By looking at the facets junctions, they'll be thick, rounded, and far from the sharpness of a diamond's facets junctions, it'll also be easy to scratch and chip, both due to its low rank on Mohs scale of mineral hardness.

Glass & treated glass

Much lower brilliance, lustre and hardness (visible in facets junctions), and a see-through effect.

Synthetic Titanite

Low hardness, extreme fire.

Now there's a whole other category which is the Synthetic diamond. This is not a fake diamond, but man-made in a laboratory. None of the methods above can detect it whatsoever. A look under the microscope may or may not detect it, depending on its type (HPHT or CVD), and depending on the quality. Only very advanced equipment from De Beers can detect them. Its another good reason to insist on certified stones.

Hallmarking


Precious metals are rarely used in their pure form, as they are too soft. Gold, silver, platinum and palladium are generally mixed (alloyed) with copper or other metals to create an alloy that is more suitable to the requirements of the jeweller or silversmith. The hallmark indicates the amount of precious metal in the alloy in parts per thousand (the millesimal fineness). In addition to indicating the town where the item was marked, a unique sponsor’s or maker’s mark identifies the item’s origin and a date letter to represents the year of marking.

All of our products come with a guarantee of the precious metal content through the 700-year-old practice of third party independent hallmarking.

This is a quality control mark placed on gold, silver and platinum and it's a safeguard for purchasers. Basically, the hallmark shows that it has been tested by an independent body (at the Assay Office) and guarantees that the metal is of one the legal standards of fineness (purity).

A hallmark also lets your jeweller quickly check what carat your jewellery is if you have to take it in for repairs or alterations. It is a legal requirement for most articles of precious metal above a certain minimum weight to carry an approved hallmark.

The British hallmark is made up of at least 3 compulsory symbols:

The Sponsor's Mark
This indicates the manufacturer, or sponsor of the item. This consists of the initials of the company who sent in the item for assaying.

The Fineness Mark
This indicates what the metal is and its standard of purity in parts per thousand.

The Assay Office Mark
This identifies the Assay Office at which the item was tested and marked.

The Goldsmiths Hall today

The Goldsmiths Hall today

The Goldsmiths’ Company Assay Office in London (also known as Assay Office London or the London Assay Office) is the oldest assay office in the United Kingdom.

The company has provided hallmarking services since the Goldsmiths’ Company was founded in the 1300s.

The company received its royal charter in 1327 and ranks 5th in order of precedence of the 12 Great Livery Companies of the City of London.

The Goldsmiths Hall in 1913

The Goldsmiths Hall in 1913

Hallmarking dates back to the 1300s, when Edward I of England passed a law requiring any item made of silver and offered for sale to be at least of equal quality as that of the coin of the realm (silver currency).

The four wardens of the Goldsmiths’ Company were tasked with visiting workshops in the City of London to assay (test) silver articles.

If these articles were found to be below standard they were originally forfeit to the King, but if they passed, each article received the King’s mark of authentication which was the mark of a leopard’s head. By 1478, there were several hundred workshops and merchants manufacturing silver articles in the City of London. It was not possible for the wardens to visit them all, and so the merchants were ordered to bring their items to Goldsmiths’ Hall for testing and marking, with a permanent Assay Office being established in the building.

This is the origin of the term hallmark – struck with the King’s mark at Goldsmiths’ Hall.

In 1544, the Goldsmith’s Company adopted the King’s mark as their town mark, and the mark of the leopard’s head is now internationally recognised as the mark of this assay office.

hallmarks
hallmarks

Leopard represents London, Anchor represents Birmingham, Rose represents Sheffield, Castle represents Edinburgh.

Precious Metals


hallmarks

Platinum

Platinum is a white metal and the most expensive and prestigious option for a ring. It is long wearing and already exceptionally white, so it does not need to be rhodium plated like white gold. Platinum is also used in rings at almost 100% purity. It is a dense metal, so a platinum ring will feel heavier on the hand than other options. Because of its higher cost, platinum is most often used in men's and women's wedding and engagement rings.

Platinum prices - £UKP - 5 / 10 / 15 year spreads

5 Year

Platinum prices

10 Year

My Image

15 Year

Platinum prices

Gold

Gold is one of the most common and desired metals used in rings of all varieties. The metal's popularity for men's or women's engagement and wedding rings is unsurpassed. 10, 14 and 18 are the most common carat values found. The larger the carat, the higher the percentage of pure gold in the ring and the more expensive it will be. The hardness and durability of gold varies depending on carat, so it is important to take these factors into account when selecting a gold ring.

Gold rings come in a number of colours, the most common being yellow, white and rose. Yellow gold is the most popular and quintessential colour. White gold is also increasing in popularity but tends to be a bit more expensive than others. When selecting a white gold ring, choosing one that is rhodium plated would be wise. White gold rings are often coated in rhodium to enhance their white colour and protect the gold below from wear and tear. Be aware the Rhodium plating can wear and you may need to have your ring re-plated after a few years wear.

Gold Bullion prices - £UKP - 5 / 10 / 20 year spreads

5 Year

Gold prices

10 Year

Gold prices

20 Year

Gold prices

Workshops


In conjunction with our partners - Jewelworks, we are pleased to be able to offer high quality restoration work including claw replacements, new setting edges, restoring galleries, new quarter/half shanks or full. 

Based in Central London, our highly skilled craftsmen sympathetically restore old and delicate pieces of jewellery to their near genuine condition, understanding the strong sentimental value attached to these pieces and the importance of retaining the original look.
 
Our jewellers have a full array of modern technology available to them such as laser welder or PAK welder, as well as traditional hand tools and can offer practical and professional advice on the viability of the restoration.

Working with unusual pieces of jewellery is one of our specialities, we have a stone cutting and polishing service to remove scratches and revitalise worn sapphires, rubies and emeralds and can set and finish all types of coloured stones.

• Repairs & alterations such as ring sizing
• New full half and quarter shanks
• Stone supply/replacement and setting
• Diamond milling
• Full polishing, rhodium & hard gold plating
• Laser welding and repairs
• Pearl and bead restringing
• Machine engraving and engraving normal or seal by hand
• On-line estimates with hard copy versions
• Assay and hallmark service
• Diamond appraisal and certificate service

Jewellery Workshop in London

Ring Boxes


A completely unique, personalised ring box. For our rings we wanted something special , a wooden ring box that was a little different to the standard mock leather plastic ring box normally available. Something that did justice to the ring inside! These are handmade in the UK and totally unique.

Engagement ring or wedding ring. Whether it's for popping the question or for one or two wedding rings these hardwood boxes are perfect. The pictures don't really do these wooden ring boxes justice. They're very tactile to hold and feel and the click of the rare earth magnets as they shut, makes a perfect finishing touch.

Ring Sizing


If you need to find out your finger size or that of a friend or loved one, then here are some simple steps to follow.

  • For the best and most accurate reading of your finger size come and visit us in our central London studio.
  • You could visit your high street jeweller and ask them to measure your finger.
  • When measuring, keep in mind that each finger could have a different size, don't presume that a ring that fits the left ring finger will also fit the right ring finger.

Lorem ipsum dolor sit amet, sapien platea morbi dolor lacus nunc, nunc ullamcorper. Felis aliquet egestas vitae, nibh ante quis quis dolor sed mauris. Erat lectus sem ut lobortis, adipiscing ligula eleifend, sodales fringilla mattis dui nullam. Ac massa aliquet.

• Measure when your hands are warm, not cold.
• Make sure the measurement you choose easily fits over your knuckle.
We often have customers who need to find out their partner’s finger size without their partner knowing. This can be quite challenging so here are a few ways people have managed in the past

• Send us an old ring that was worn on the same finger
• Use our ring sizing guide to measure an old ring that was worn on the same finger.

For your peace of mind, we provide free lifetime resizing with all of our rings.

U.K. USA / CND Diameter (in millimeters) Circumference (in millimeters)
F 23/4 13.7 43.65
G 31/4 14.3 44.90
H 4 14.7 46.20
I 41/2 15.1 47.45
J 43/4 15.5 48.70
K 51/2 15.9 49.95
L 53/4 16.3 51.25
M 61/4 16.7 52.45
N 63/4 17.1 53.70
O 71/4 17.5 55.00
P 73/4 17.9 56.25
Q 8 18.3 57.50
R 83/4 18.7 58.75
S 91/4 19.1 60.00
T 93/4 19.5 61.25
U 10 19.9 62.50
V 101/2 20.3 63.75
W 11 20.7 65.00
X 111/2 21.1 66.30
Y 12 21.5 67.50
Z 121/2 21.9 68.75